The professional producer of the cooler box    Tel: +86-750-8211933    E-mail£º
Project Builder Application Case Main Features

 AHIC Feature and Advantage

It can in a long time not to electricity, energy conservation and environmental protection under the condition of keep the ideal temperature, suitable for storage of various kinds of fresh fruits, drinks, beef, red wine, fresh fish, as well as transportation, storage of food, LengLian medical products. It is suitable for travel and outdoor activities. Because of these advantages£¬The AHIC bay incubator is popular with people from all walks of life.

 Molded Tie down Slots

The molded-in tie down slots makes it easy to secure your AHIC Coolers to your truck bed, or boat. Two integrated tie-down slots are included on each side of the cooler making installation of the tie down straps quick and easy.

      Keeps Ice for Up to 5 Days

It's like a portable freezer. The pressure-injected commercial grade polyurethane insulation keeps ice for up to 5 days. The closed-cell insulation foam stops air and moisture. This insulation, combined with a freezer grade gasket and durable solid construction gives AHIC coolers outstanding thermal properties.



  Commercial Grade Insulation

Keeping ice for up to 5 days is easy as the walls of AHIC coolers contain 5cm of pressure-injected commercial grade polyurethane foam insulation and our lids have up to 5.5cm of the same premium foam. The insulation used is a closed-cell foam that stops air and moisture. Because of the foam¡¯s density and glue-like tenacity, it also adds structural strength to the walls. 

  Heavy Duty T-Latches

Our lid T-latches are made from all-weather heavy-duty flexible silicone, making our latching system one of the most durable and secure on the market. Designed to interlock into the body of the cooler, AHIC coolers stay shut in the most extreme environments. Our latches provide smooth trouble-free performance under real-world conditions and the T-handle style provides sure grip for operating latch. The latches are UV resistant and completely non-corrosive.

Freezer Grade Gasket

Our coolers lock in the cold with a high quality freezer gasket that completely circles the full length of the lid locking in the cold. It's like a portable freezer. It keeps the cold air in and the warm air out. The seal is a very important part of the cooler as it helps keep the cooler colder longer. The gasket measures a 6mm wide and a 6mm thick and helps prevent leakage if the cooler were to turn over on its side.

Easy-Lift Lid Handle

We designed the AHIC coolers with an extended lid to help make opening the cooler easier. The lid handle extends 12mm past the cooler¡¯s edge. No more pulling on the T-latches to open the cooler. Using the latches to open the cooler could stretch the latches and make the seal less effective and thus cold air to escape the cooler.

Molded-In Handles & Rope Handles

The AHIC 25 & AHIC 35 & AHIC 45 & 65 & AHIC85 coolers have two types of handles that provide for easy lifting. AHIC¡¯s recessed integrated side handles are molded into the body of the cooler making for easy lifting of a fully loaded cooler in and out of vehicles or boats. The heavy duty marine-grade rope handles with comfort grips makes it comfortable to transport the heaviest loads.

Non-Slip Feet

Non-marking rubberized feet prevent the cooler from sliding around on boat decks or truck beds, keeping the AHIC firmly in place.
Our non-slip feet riser technology is a key functional design element that improves cooling performance by minimizing contact with hot surfaces. The feet elevate the cooler off hot surfaces allowing air flow underneath the cooler for maximum cooling and easy deck cleaning.

Integrated Hinge System

The lid and body of our coolers are connected utilizing a full length integrated hinge system which prevents the lid from over extending or separating from the body. The AHIC hinge system also utilizes corrosion- resistant stainless steel hinge rods thatare tough enough to withstand marine environments.

 Rapid V-Drain System

 Easy-Flow Drain Spout

 Dry Ice Compatible & No Sweat Design

 Our coolers utilize a recessed V-Drain system allowing the
cooler to be drained completely.

 Our drain plug lets the water out and keeps
ice in. Also designed to allow quick draining. 
The drain plug contains a gasket making it leak proof and insulated.

 AHIC Coolers are made of food grade
UV-resistant polyethylene that is
dry-ice compatible. The coolers exterior
does not sweat.

 Non-Slip Lid

 Locking System

 Cool-Lift Riser

 Our lids have a non-slip textured surface.
The cooler can even be used as a casting

 Add a long shank padlock to keep AHIC contents
safe and secure.

The specially designed feet lift the cooler above
hot surfaces.



Copyright © 2017 Aohong Industry Co., Ltd. All Rights Reserved.     ÔÁICP±¸17032700ºÅ-3